â·ÃÊͺ¶ÒÁÃÒ¤Ò ¡Åéͧ¶èÒÂÀÒ¾¤ÇÒÁÃé͹ Fluk Ti25 This is a handy tool for trouble shooting and maintaining electrical systems gives us the capability to do preventative maintance instead of all reactive Fluke Ti25 Thermal Imager Enhanced problem detection and analysis capabilities with IR-Fusion® Technology. Simply scroll through the different viewing modes quickly to better identify trouble areas in Full IR thermal, picture-in-picture, or automatic blend visual and thermal images. Optimized for field use in harsh work environments. Engineered and tested to withstand a 2 m (6.5 ft) drop—When was the last time you dropped a tool? Withstands dust and water—tested to an IP54 rating. Delivers the clear, crisp images needed to find problems fast. Identify even small temperature differences that could indicate problems with excellent thermal sensitivity (NETD). Intuitive, three-button menu is easy to use—simply navigate with the push of a thumb. Reflected background temperature (reflected temperature compensation) No need to carry pen and paper—record findings by speaking into the camera. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference. Everything needed to get started is included. Training DVD is now included free. See how easy it is to set up your thermal imager, create professional reports with SmartView software and learn thermography theory with step-by-step video instructions. Adjustable hand strap for left-or right-handed use. Specifications Temperature Temperature measurement range (not calibrated below -10 °C) -20 °C to +350 °C (-4 °F to + 662 °F) (two ranges) Temperature measurement accuracy ± 2 °C or 2 % (whichever is greater) On-screen emissivity correction Yes Imaging performance Field of view 23° x 17° Spatial resolution (IFOV) 2.5 mRad Minimum focus distance Thermal lens: 15 cm (6 in) Visible (visual) light lens: 46 cm (18 in) Focus Manual Image frequency 9 Hz refresh rate Detector type 160 X 120 focal plane array, uncooled microbolometer Infrared lens type 20 mm F = 0.8 lens Thermal sensitivity (NETD) ≤ 0.09 °C at 30 °C target temp. (90 mK) Infrared spectral band 7.5 μm to 14 μm Visual camera 640 x 480 resolution Image presentation Palettes Ironbow, blue-red, high contrast, amber, hot metal, grey Level and span Smooth auto-scaling and manual scaling of level and span Minimum span (in manual mode) 2.5 °C (4.5 °F) Minimum span (in auto mode) Fast Auto/Manual Range Toggle Fast Auto Rescale 5 °C (9 °F) IR-Fusion® information Full infrared with MAX, MID, or MIN automatic blending; and picture-in-picture with MAX, MID, or MIN automatic blending (Visual and IR blending) Picture-In-Picture (PIP) Three levels of on-screen IR blending displayed in center 320 x 240 pixels Full screen (PIP off) Three levels of on-screen IR blending displayed in center 640 x 480 LCD Image capture and data storage Voice annotation 60 seconds maximum recording time per image; reviewable playback on imager Storage medium SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations or 3000 basic (.bmp) IR images) File formats Non-radiometric (.bmp) or fully-radiometric (.is2) No analysis software required for non-radiometric (.bmp) files Export file formats w/SmartView® software JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF General specifications Operating temperature -10 °C to +50 °C (14 °F to 122 °F) Storage temperature -20 °C to +50 °C (-4 °F to 122 °F) without batteries Relative humidity 10 % to 90 % non-condensing Display 9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD with backlight (selectable bright or auto) Controls and adjustments User selectable temperature scale (°C/°F) Language selection Time/Date set Software SmartView® full analysis and reporting software included Batteries Internal rechargeable battery pack (included) Battery life Three to four hours continuous use (assumes 50 % brightness of LCD) Battery charge time Two hours for full charge AC operation/charging AC adapter/charger (110 Vac to 220 Vac, 50 Hz to 60 Hz). Charges battery while imager is operating. Universal ac mains adapters included. Power saving Sleep mode activated after 5 minutes of inactivity, automatic power off after 20 minutes of inactivity Safety standards CE Directive:IEC/EN 61010-1 2nd Edition Pollution Degree 2 Electromagnetic compatibility EN61326-1 C Tick IEC/EN 61326 US FCC CFR 47, Part 15 Class A Vibration 2 G, IEC 68-2-29 Shock 25 G, IEC 68-2-29 {2 m (6.5 ft) drop, 5 sides} Drop 0.27 m x 0.13 m x 0.15 m (10.5 in x 5 in x 6 in) Dimensions (H x W x L) 1.2 kg (2.65 lb) Weight (battery included) 2 G, IEC 68-2-29 Enclosure rating IP54 (protected against dust, limited ingress; protection against water spray from all directions) Warranty Two-years (standard) Recommended calibration cycle Two-years (assumes normal operation and normal aging) Supported Languages Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Traditional Chinese, and Turkish ACCESSORIES Model Name Description FLK-Ti25 9 Hz Thermal Imager Thermal Imager Included with product: Thermal imaging camera w/ 20 mm lens AC power supply/battery charger (including mains adapters) SD memory card SD card reader (USB) for downloading images into your computer SmartView™ software with free software upgrades for life Rugged hard carrying case Soft transport bag Hand strap Users manual Warranty registration card Optional accessories: Fluke-TI charger Thermal Imager Car Charger (standard 12 V dc auxiliary power adapter) Fluke FLUKE TI25 Thermal imaging camera ¡Åéͧ¶èÒÂÀÒ¾¤ÇÒÁÃé͹