â·ÃÊͺ¶ÒÁÃÒ¤Ò HI98501 Checktemp® C Electronic Digital Thermometer HI98501 Checktemp® C Electronic Digital Thermometer ±0.3°C accuracy CAL CHECK® Ideal for spot checks Fast and accurate results If you ever wished that your temperature measurements could be made a little easier, the Checktemp® might just be what you’re looking for! The Checktemp® offers high accuracy over a wider range without worrying about breakage or condensation. The Checktemp® offers NO breakage, NO waste, NO injuries, NO difficulty in reading; not even a parallax error by taking a wrong measurement due to the angle of view! Checktemp® is provided with HANNA’s unique CAL CHECK™ function for accurate measurements every time: simply activate a switch and the instrument will simulate an ice bath of 0.0°C (32.0°F) signal that is displayed on the LCD within a range of ±0.3°C (±0.5°F). The sharp-tip probe of the Checktemp® easily penetrates semisolid products, making routine controls simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements. Models with factory calibration certificate against NIST standards are also available. Order Information: HI 98501 (Checktemp®C) is supplied with penetration probe, protective cap, battery and instructions. For model with Factory Calibration Certificate, order HI 98503 Range -50.0 to 150.0°C Resolution 0.1°C Accuracy ±0.3°C (-20 to 90°C) ±0.5°C (outside) Probe fixed stainless steel 105 x dia 3 mm (4.1 x dia 0.1") (penetration) Battery Type / Life 1.5V / approximately 3000 hours of continuous use Environment 0 to 50°C (32 to 122°F); RH max 95% Dimensions 66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter only Weight 50 g (1.8 oz.) - meter only Hanna HI98501 Temperature Thermometer à¤Ã×èͧÇÑ´ÍسËÀÙÁÔ à·ÍÃìâÁÁÔàµÍÃì