Introducing the 804A Video Test Generator supporting HDMI 1.4 297MHz capability for testing HDT Vs with 4K x 2K resolutions. The rack mountable 804A is optimized for testing modern HDMI flat panel TVs on a production line. It features four (4) HDMI outputs all active simultaneously for testing HDTVs with multiple HDMI inputs. This eliminates the need for splitters often required for testing each HDMI input on an HDTV. The 804A can also output component analog and composite analog for testing an HDT Vs analog video outputs. The 804A is equipped with all the standard video timings up tp 297 MHz and test patterns including 3D patterns and tests for HDMI protocols such as HDCP, EDID and CEC. The 804A tests compressed and uncompressed HDMI audio formats using a variety of audio test signals. An HDT V’s analog audio inputs can also be tested using the 804A’s programmable analog audio outputs. Key Features Four (4) HDMI outputs Max pixel clock 24 bit color: 297MHz; e.g. 4Kx2K 30Hz. Max pixel clock 36 bit color: 165MHz; e.g. 1080p60 Max TMDS rate 297MHz; 2.97Gb/s per channel. Analog video outputs Test HDTVs analog component and composite video inputs. Standard video timings and patterns Supports standard video timings and test patterns, including HDMI 1.4a 3D test images. HDMI and analog audio outputs Support HDMI compressed and uncompressed audio formats Various patterns with programmable amplitude, sampling rate and bit depths. Serial command line interface RS-232 and USB interface for command line control or for automated test system. Rack mountable Fits in a standard 19” relay rack. Occupies two rack units. Color touch display Monitor the status of the test on the color display. Configure the 804A through the touch interface. USB host interface (Optional) Attach a keypad for simplified testing